Pump Material Vacuum Feeding Machine Motor Type PVC Powder Granule Transport
Introduction
The vacuum feeder unit is using whirlpool air pump extracting air. The inlet of absorption material tap and whole system is made to be in vacuum state.
The powder grains of material are absorbed into the material tap with ambient air and formed to be the air flowing with material. Passing the absorption material tube, they arrive to the hopper.
The air and materials are separated in it. The separated materials are sent to the receiving material device. The control center controls the “on/off” state of pneumatic triple valve for feeding or discharging the materials.
Features
1. The whole machine is powered by vortex air pump, which is oil-free, waterless and maintenance-free.
2. The whole conveying process is completed in a completely closed state, eliminating dust pollution.
3. The machine is of building block type, and the barrel body is connected with quick opening clamp, which is convenient for disassembly and cleaning.
4. Less energy consumption, low noise and convenient control.
5. Use special s-type flanging between barrels to prevent dust overflow more effectively.
Application
Vacuum conveyor machine is mainly used for conveying powder and granular materials. Vacuum conveyor is the most advanced, perfect vacuum conveying equipment of powder material, granular material, powder and granular material mixture.
It can automatically transport a variety of materials to mixing machine, packing machine, injection molding machine, and grinder etc.
Working Principle
The automatic feeding machine is the process of moving bulk dry materials, such as powders, from pick-up place A to destination place B within a factory using suction.
The material is transferred in a network of tubing from the pick-up point or source to the customer’s process. Most Vacuum conveying system transfer product based on a timed interval to the vacuum receiver. During conveying, the material is entrained in the air stream and there is an almost equal part of air and product.
At the end of the timed sequence the discharge valve can open and the conveyed material can discharge into the process
Technical Parameters
| Model | ST-300 | ST-300 new | ST-700 |
| Motor | Type | Brush type |
| Specification | 1200w |
| Transport Capacity (kg/h) | |
| Static Wind Pressure (mmAq) | 150mmAq |
| Filter (mm) | | | 185*118mm |
| Hopper Capacity (L) | 7.5 |
| Feed Pipe Diameter | 38mm |
| Dimension | Main Body | 50*40*60cm | 50*40*80cm | 48*31*43cm |
| Hopper |
| Weight | Main Body | 13.5 | 15.5 | 15.5 |
| Hopper | 5 |
Our Advantage
The product of Tongxin company can be sent to the Quality and Technical Supervision Bureau for mesh detection, if not in line with the national standards for you free return and replacement. The follow picture is our quality inspection report.
Our Service
1. We Provide video installation instructions;
2. We offer 24-hour online consulting service;
3. 20 years production experience to ensure quality;
4. We have thorough data to ensure the quality;
5. We provide detailed instruction an product information;
6. We provide 12 months quality warranty.
If you want to get more information of product, please contact us!
Product Tags:
|
|
Pump Material Vacuum Feeder 380V Motor Type PVC Powder Granule Transport Images
|
